The
GVS9000 AMD Optron 4-Way processor hypertransport Edition this
feature-rich core-logic component provides sophisticated I/O functionality
to systems implementation HyperTransport technology. Replacing
the traditional "Southbridge," this component integrates
storage, connectivity, audio, I/O expansion, security, and system
management functions into single system 128-bit
dual channel memory bus total five hardware monitoring
IC for each AMD chip, 32GB
Registered ECC DDR Memory. Maximum
bandwidth of up to 6.4GB/s
with upto 512MB Video
Graphic RAM selection with AGP8X or PCI Express
GVS9000
QUAD AMD OPTERON Processor Rack workstation server with speed
available up to AMD 8000 series processors, with high speed
SATA, U320 or Fibre internal
storage option SAN or NAS high-bandwidth
in 64-bit rack-optimized computer workstation with Graphics
card suport
Specification:
Processor
• Dual µPGA 940-pin ZIF sockets
• Two onboard 4-phase VRM
• Supports up to two AMD
Opteron™ 200 processors
• Three HyperTransport™ links support up to
8.0GB/s data transfer rate each link
• 144-bit DDR interface (128-bit data + 16 bit ECC)
• Scalable 32bit & 64bit computing
• Secure computing with Nx register support
• Dual Core support
Chipset
• AMD-8131™
HyperTransport™ PCI-X Tunnel
• NVIDIA nForce Professional 2200 (CK8-04)
• NVIDIA nForce Professional 2050 (I/O-4)
- Connected to CPU 2
• SMsC Super I/O
Memory
• 128-bit dual channel (interleaved) memory bus
• Total eight DDR DIMM sockets (four per CPU)
• Supports up to 16GB of Registered DDR
• Supports ECC with CHIPKILL Technology
• Supports DDR 400 / 333 / 266 memory
Expansion Slots
(total of six usable slots)
• Two x16 PCI Express FULL SPEED slots
- Slot1 PCI-E x16 from nForce™ Prof.
2200
- Slot3 PCI-E x16 from nForce™ Prof.
2050
• Two independent 64-bit PCI-X buses
- Slot 4 & 5: PCI-X 100 MHz max. (Bridge
B)
- Slot 6: PCI-X 133 MHz max. (Bridge A)
• One 32-bit 33MHz PCI v2.3 (Slot 2)
Integrated
I/O
• One floppy connector
• One serial port connector and one 3pin custom
serial header
• Eight USB 2.0 EHCI ports
(four rear connectors and four pin headers)
• PS/2 mouse and keyboard connectors
• Two FireWire (IEEE 1394a) ports
(one rear connector and 1 internal pin
header)
System Management
• Total of six 4-pin fan headers with PWM and
tachometer monitoring
• Temperature, voltage and fan monitoring
Integrated
ATA-133
• One ATA-133 IDE Channel for up to two devices
Integrated
FireWire (IEEE 1394a)
• TI TSB43AB22A IEEE 1394a PCI controller
• Two FireWire ports (one rear connector and one
internal pin header)
Integrated
SCSI Controller
(option)
• LSI 53C1030 U320 SCSI controller
- Two U320 68-pin SCSI connectors
- Connected to PCI-X Bridge B
Integrated
SATA II Controller
• Two integrated dual port SATA II controllers
• Four SATA connectors: up to four drives
• Supports 3.0Gb/s per port
• NvRAID™ v2.0 support
• RAID 0, 1, 0 + 1
Integrated
Secure Network Processor
• Two IEEE 802.3 Nvidia MAC 1000/100/10
Ethernet (1st from nForce™ Prof. 2200,
2nd from nForce Prof. 2050)
• Supports WOL and PXE
• Supports Ethernet Jumbo Frames (9018 Bytes)
• Full Duplex Gigabit Ethernet support
BIOS
• Phoenix BIOS on 8Mbit LPC Flash ROM
• Supports ACPI 2.0 and SRAT
• SMBIOS 2.3.1 BBS 1.1 Compliant
• USB device boot
• WOL and PXE support
• 48-bit LBA Support
Form
Factor
• SSI EEB v3.5 footprint (12"x13"; 304.8x330.2mm)
• EPS12V/SSI 3.51 Workstation (24 + 8 + 6) power
connectors (Split Plane design recommended)
• Serial (one) connector
• Two dual port USB 2.0 connectors (total 4 ports)
• Stacked PS/2 keyboard and mouse connectors
• Two RJ-45 LAN connectors with LEDs
• Audio Line-in, Line-out, Mic-in jacks
• One IEEE 1394a port
Regulatory
• FCC Class B (DoC)
• European Community CE (DoC)
